eyewear_accessories a_eye_protection_for_active_sports

>Eyewear information >How to change lenses on Dixon eyewear

To change lenses on your Dixon eyewear, please follow the appropriate steps described for your model below.

Changing lenses on half rim models

To change the lenses on the half rim type of Dixon glasses, such as the RX Adventure or Half Rim glasses/goggles, click the link below:

Lens removal on half rim models

Changing lenses on full rim models

The video below explains how to change lenses on the Dixon RX2, TAC-3, TEPS, Aero-5, and SKI-1 sports glasses / goggles.

1. Unclip the foam gasket

Before removing the lenses, you first need to take off the soft foam gasket, if fitted. On most Dixon eyewear models this is clipped at both sides and at the nose bridge.

2. Unclip the Rx optical clip lenses

If you have an RX clip prescription lens fitted to your eyewear, you now need to remove it before you change the tinted lenses. Pull the two plastic retaining lugs on the Rx clip gently away from the frame. It may help to use the flat of a screwdriver to prise off the Rx clip, but do so with care!

3. Flex the eyewear frame to pop out the lenses

Grip the frame firmly at the top and bottom as shown, and flex the frame, while pushing the lens from below. This will pop the lens out from the front of the frame.